Cargo Integrity Group calls for risk-based measures to prevent pest contamination

COA, ICHA, Golbal Shipping Forum, TTV and World Shipping Council logoThe international freight transport organisations of the Cargo Integrity Group are calling for urgent action from actors in global supply chains to reduce the risk of pest transference through international cargo movements. The five partners in the Cargo Integrity Group, known as CIG, recognise the vital importance of focusing on the threat of invasive pests to natural resources across the world, and of the urgency in crafting risk reduction measures that address the situation.

This call to action follows the intentions by pest control experts under the auspices of the International Plant Protection Convention Continue reading “Cargo Integrity Group calls for risk-based measures to prevent pest contamination”

Guidelines for fuel oil sampling and designated sampling points

Guidelines for fuel oil sampling and designated sampling points
Guidelines for fuel oil sampling and designated sampling points

During MEPC-75 meeting, that was held in November-2020, new amendments to MARPOL Annex VI were adopted through Resolution MEPC.324(75). These amendments will enter into force on 1 April 2022. It introduces new requirements for fuel oil sampling points and outline methods for sampling fuel oil to validate its sulphur content.

Essentially, there are three types of fuel oil samples as defined in the IMO guidelines:
-sample of the fuel delivered to the ship during the bunker operation, i.e. ‘MARPOL delivered sample’ (MEPC.182(59))
– sample of the fuel oil in use on a ship, i.e. ‘in-use sample’ (MEPC.1/Circ.864/Rev.1) Continue reading “Guidelines for fuel oil sampling and designated sampling points”

Cargo tank explosion and fire on chemical tanker Stolt Groenland report published

Cargo tank explosion and fire on chemical tanker Stolt Groenland report published
Cargo tank explosion and fire on chemical tanker Stolt Groenland report published

On 28 September 2019, a cargo tank containing styrene monomer on board the MAIC (Maritime Authority of the Cayman Islands) registered chemical tanker Stolt Groenland ruptured due to runaway polymerisation. The catastrophic rupture released a large quantity of vapour to the atmosphere, and it subsequently ignited. Fire-fighting efforts by the emergency services took over six hours and involved more than 700 personnel and 117 units of fire trucks, pumps and fire tugs.

The rupture of the styrene monomer tank resulted from a runaway polymerisation that was initiated by elevated temperatures caused by heat transfer from other chemical cargoes. The elevated temperatures caused the inhibitor, added to prevent the chemical’s polymerisation during the voyage, to deplete more rapidly than expected. Athough the styrene monomer had not been stowed directly adjacent to heated Continue reading “Cargo tank explosion and fire on chemical tanker Stolt Groenland report published”

Checking for failed wire rope terminations safety alert issued

Safety alert urges surveyors to inspect and check wire rope terminations
Safety alert urges surveyors to inspect and check wire rope terminations

The US Coast Guard (USCG) has published a safety alert to addresses the importance of verifying the condition and manufacturing of wire rope terminations that are used in various systems that utilize wire rope in a load-handling capacity (e.g., lifesaving appliances, cranes, lifting slings). The Coast Guard is currently investigating a casualty involving a failed wire rope termination that resulted in extensive damage to equipment.

The Coast Guard has observed that improperly applied swaged fittings could result in unintentional damage to the wire rope, resulting in failure of the termination. Improper swaging procedure includes failures within a quality management system in which materials are improperly selected and do not match the specifications of the original equipment manufacturer.

Continue reading “Checking for failed wire rope terminations safety alert issued”

RMI recommends all immersion suits to be checked rather than spot checks following a number of defective items

RMI recommends all immersion suits to be checked rather than spot checks following a number of defective items
RMI recommends all immersion suits to be checked rather than spot checks following a number of defective items

The Republic of the Marshall Islands (RMI) has published a Marine Safety Advisory notice. In it RMI stresses the importance of properly inspecting and maintaining all immersion suits, following a number of recent cases of defective equipment found onboard RMI flagged vessels.

Since 2019, when RMI shared a marine safety advisory focusing on the importance of following the manufacturer’s instructions for maintaining immersion suits, there have been multiple additional instances of defective or improperly maintained suits on RMI-flagged vessels, one of which resulted in a PSC detention by the US Coast Guard. In that case, “29 of 32 immersion suits were unserviceable due to unsealed seams,” and these suits were only five years old.

On a second occasion during a flag State inspection, an inspector found 38 out of 39 immersion suits not fit for use. In this case, the Continue reading “RMI recommends all immersion suits to be checked rather than spot checks following a number of defective items”

ABS guidance on reduced manning requirements

ABS publishes guidance on reduced manning requirements for safe operations
ABS publishes guidance on reduced manning requirements for safe operations

Guidance on the technology, systems and regulations needed for minimizing human presence on offshore facilities has been published by ABS. The whitepaper evaluates technology, regulations, systems and design issues. Reduced Manning on Offshore Facilities introduces some of the considerations essential for remotely operating floating facilities from a control center located nearby or onshore. To enable reduced manning without compromising safety, real-time monitoring, control automation and maintenance procedures incorporating remote diagnostics and simulations with minimal human intervention will be required.

“By utilizing new technologies, the number of personnel on board offshore assets can be reduced, minimizing personnel exposure and potentially reducing overall capital and operating costs. Since a significant reduction in manning is a fundamental shift for the industry, it Continue reading “ABS guidance on reduced manning requirements”

STEERSAFE project report provides analysis of SOLAS regulations on steering and manoeuvrability

STEERSAFE project report provides analysis of SOLAS regulations on steering and manoeuvrability
STEERSAFE project report provides analysis of SOLAS regulations on steering and manoeuvrability

The European Maritime Safety Agency (EMSA) has published a report, presenting the findings from the STEERSAFE project, conducted on its behalf by DNV.

The STEERSAFE project aims to provide a holistic analysis of the SOLAS regulations and associated circulars related to steering and manoeuvrability, provide a consistent update of these and to propose practical and meaningful performance parameters in normal service and in failure mode.

More specifically, the first phase of the project aims to:
– Provide an overview of the current situation, in terms of a description of relevant steering and propulsion systems and the gaps and Continue reading “STEERSAFE project report provides analysis of SOLAS regulations on steering and manoeuvrability”

What to know about hatch cover maintenance

What to know about hatch cover maintenance
What to know about hatch cover maintenance

In association with McAusland Turner, The Shipowners Club has published advice on effective hatch cover maintenance for dry cargo ships including preventative action against ingress of water. According to the Club, one of the key requirements in cargo vessel operations is ensuring that the cargo is delivered to the discharge port in the same condition in which it was loaded. Despite improvements in the methods for ensuring that hatch covers are weathertight, claims for wetted cargo that has resulted from water ingress through hatch covers are still being experienced.

In order to ensure that hatch covers are closed sufficiently it is vital that the correct procedures are followed every time the hatches are closed and opened. This can be achieved by ensuring that crew are duly familiar with the manufacturer’s operating instructions, the company’s on board operation procedures, risk assessments and any other relevant policies related to these operations. Occasionally, Continue reading “What to know about hatch cover maintenance”

Fatality of crew member after head trapped in hatch cover panel report published

Fatality of crew member after head trapped in hatch cover panel report published
Fatality of crew member after head trapped in hatch cover panel report published

The Japan Transport Safety Board (JTSB) has published its report into the death of a boatswain while the cargo vessel FIRST AI was mooring off Kyoto in September 2019 when his head was trapped in a hatch cover panel while performing hatch cover closing duty.

A master, Officer A, a chief engineer, a boatswain, and six other crew members boarded the Vessel. While the ship was mooring at Maizuru Port in Kyoto, at around 10:45 on September 9, 2019, Officer A and the boatswain began closing the hatch covers in preparation for departure after finishing the unloading tasks.

While visually checking the condition of the hatch cover on the port upper deck during the closing of the hatch cover, Officer A noticed that the rubber packing 2 for sealing the hatch cover near the Arm that had been temporarily repaired during the previous navigation had flaked. Hence, he instructed the boatswain, who was operating the closure at the hatch cover handling stand on the starboard side of the Continue reading “Fatality of crew member after head trapped in hatch cover panel report published”

Inspection guidance for small passenger vessels issued by USCG

Inspection guidance for small passenger vessels issued by USCG
Inspection guidance for small passenger vessels issued by USCG

The US Coast Guard (USCG) has issued inspection guidance for Officers in Charge, Marine Inspection (OCMI), Chiefs of Inspection Division (CID), and Marine Inspectors for the small passenger vessels (SPV) risk-based inspection program.

USCG continues to conduct statutory inspections on the SPV fleet in accordance with 46 U.S. Code § 3301; however, data analytics provide a new tool and modernized approach to the marine inspection program to prioritize marine inspection resources. Using various computational methods, machine learning-enabled software, and a database of deficiency and casualty information, the Coast Guard developed a model to categorize SPVs based on potential risk for an undesirable outcome.

The CVC-WI-028 “Small Passenger Vessel Risk Based Inspection Program” issued by the USCG Office of Commercial Vessel Compliance (CVC) on 14 June says:

Continue reading “Inspection guidance for small passenger vessels issued by USCG”

U.S. Coast Guard releases 2020 Boating Safety Statistics Report revealing a surge in fatalities during the pandemic

2020 Recreational Boating StatisticsThe U.S. Coast Guard released its 2020 Recreational Boating Safety Statistics Report Wednesday, revealing that there were 767 boating fatalities nationwide in 2020, a 25.1 percent increase from 2019.

From 2019 to 2020, the total number of accidents increased 26.3 percent (4,168 to 5,265), and the number of non-fatal injured victims increased 24.7 percent (2,559 to 3,191). There is evidence that boating activity increased significantly during the pandemic, from reports of increased boat sales, insurance policies taken out, insurance claims, and calls for towing assistance. With the increased exposure (i.e., more boating hours), there was greater risk of deaths, injuries, and accidents. The Coast Guard is analyzing variables associated with boating activity to normalize this accident data. Continue reading “U.S. Coast Guard releases 2020 Boating Safety Statistics Report revealing a surge in fatalities during the pandemic”

Failure or accidental release of the lifeboat hooks can be fatal

Lifeboats are designed to save lives, but over the years there have been many serious casualties that have occurred during drills, routine maintenance operations and inspections of davit suspended boats fitted with on-load lifeboat release hooks. These accidents have also resulted in seafarers losing confidence in the lifeboat launching systems. Continue reading “Failure or accidental release of the lifeboat hooks can be fatal”

Instagram Posts from the IIMS @iimsmarine

Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.

Strictly Necessary Cookies

Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.

Show details
Performance & Marketing Cookies

This website uses Google Analytics to collect anonymous information such as the number of visitors to the site, and the most popular pages. This also helps us optimise our marketing campaigns. User data sent to Google Analytics may be used for ad personalization and measurement of our ad campaigns. Keeping this cookie enabled helps us to improve our website.

Show details