Poor hull maintenance linked to flooding of towing vessel Tom Bussler says NTSB report

Poor hull maintenance linked to flooding of towing vessel
Poor hull maintenance linked to flooding of towing vessel

The National Transportation Safety Board (NTSB) has published an investigation report on the flooding and sinking of towing vessel ‘Tom Bussler’ on Tennessee River in January 2019. The incident stressed issues associated with poor hull maintenance and repair.

On January 7, 2019, about 2030 local time, the towing vessel Tom Bussler was transiting in light boat condition (no tow) upbound on the Tennessee River at mile 15 near Calvert City, Kentucky, when it began flooding and quickly sank in the channel. Both crew members aboard abandoned the Continue reading “Poor hull maintenance linked to flooding of towing vessel Tom Bussler says NTSB report”

MFV Suzanne II: MCIB publish report on the fire and loss

MFV Suzanne II
MFV Suzanne II

Ireland’s Marine Casualty Investigation Board (MCIB) has released its investigation report on the fire and loss of MFV Suzanne II, east of Arklow, in May 2019. While the exact source of the fire is unknown, the report highlights that the quick response of the crew and their knowledge on when to abandon ship was key to their successful rescue.

On 2 May 2019 the MFV Suzanne II, a fishing vessel, was stopped 30 nautical miles east of Arklow and the crew were taking a break between fishing activities when a crew member observed smoke coming from an engine room vent. The skipper went Continue reading “MFV Suzanne II: MCIB publish report on the fire and loss”

IMO Tier III certification for a megayacht achieved by the first Italian shipyard; CRN

IMO Tier III certification for a CRN
IMO Tier III certification for a CRN

CRN, part of Ferretti Group, is the first shipyard in Italy to receive IMO Tier III certification for the CRN M/Y 137, a soon-to-be-delivered fully custom steel and aluminium 62-metre megayacht. This success is a well-earned reward for an industrial strategy firmly centred on environmental stewardship and sustainable development.

IMO Tier III is the International Maritime Organisation standard that enshrines the naval industry’s commitment to safeguarding the environment; CRN has attained certification right from its first pleasure vessel to be delivered in early 2020. Continue reading “IMO Tier III certification for a megayacht achieved by the first Italian shipyard; CRN”

Through-bulkhead seal safety enhanced by non-welding advancement

Through-bulkhead
Through-bulkhead

A new solution for sealing metal pipes without welding is speeding up installation time and cutting costs in shipyards, while also enhancing the safety of the through-bulkhead seal.

Roxtec’s SPM seal holds pipes in place by use of a metal and rubber sandwich. No welding is required. A gasket of EPDM (Ethylene Propylene Diene Monomer) rubber is held between two flanges of marine grade 316 stainless steel. The seal is slid over the end of the pipe, then the pipe is pushed into an oversized aperture on the bulkhead. Continue reading “Through-bulkhead seal safety enhanced by non-welding advancement”

3D-printed part delivery to Bulker in world first

First commercial delivery of 3D-printed scupper plugs
First commercial delivery of 3D-printed scupper plugs

Berge Mafadi, a 300,000 dwt bulk carrier operated by Berge Bulk, has received the world’s first commercial delivery of 3D-printed scupper plugs. Berge Bulk is one of several companies enrolled in a Wilhelmsen Ships Service early adopter program that gives customers access to on-demand additive manufacturing. Other customers for the program, launched in December 2019, include Carnival Maritime, Thome Ship Management, OSM Maritime Group, Executive Ship Management and Wilhelmsen Ship Management.

“We are very excited with this milestone — completing one of the first commercial Continue reading “3D-printed part delivery to Bulker in world first”

Moonrise: Largest Dutch superyacht ever built is launched

Moonrise, the largest yacht by waterline to be built in the Netherlands
Moonrise, the largest yacht by waterline to be built in the Netherlands

As the worldwide demand for megayachts seems undiminished, Dutch shipyard Feadship has launched the 99.95-metre (327.91-foot) Moonrise, the largest yacht by waterline to be built in the Netherlands. The vessel successfully marries sleek sensual lines with a modern masculine profile. A wide range of luxurious details, long hull windows, a glorious grey hull and striking vertical bow add to the elegance of the design by Studio De Voogt.

Moonrise has a very impressive volume thanks to a 15.50-metre beam. This has generated great interior space for 16 people across eight staterooms. There is also exceptionally high-end crew accommodation for up to 32 crew, which are bathed in Continue reading “Moonrise: Largest Dutch superyacht ever built is launched”

Wärtsilä & DNV GL agree to collaborate in accelerating marine sector’s digital transformation

Roger Holm, President, Wärtsilä Marine and Knut Ørbeck-Nilssen, CEO, DNV GL – Maritime
Roger Holm, President, Wärtsilä Marine and Knut Ørbeck-Nilssen, CEO, DNV GL – Maritime

The technology group Wärtsilä and classification society DNV GL have signed a Memorandum of Understanding (MoU) in which they agree to work together to contribute to the marine industry’s ongoing digital transformation. In particular, the two companies wish to further explore the potential use of digital technologies, collaborative data sharing, and standardisation to enhance existing products and services, and to develop new ones. The agreement was signed by Roger Holm, President, Wärtsilä Marine and Knut Ørbeck-Nilssen, CEO, DNV GL – Maritime on 6th February.

Among the focus areas will be collaboration on digital technologies and big data in classification and the requirements for their use. The project will examine the application of these technologies in areas such as autonomous ships, advanced Continue reading “Wärtsilä & DNV GL agree to collaborate in accelerating marine sector’s digital transformation”

Lubrication oil filter was mounted poorly resulting in engine failure

Lubrication oil filter
Lubrication oil filter

Transport Malta’s MSIU has released an investigation report on the main engine failure of the oil/chemical tanker ‘MV Guroni’ while underway in January 2019. According to the report, the lubrication oil filter of the main engine had been improperly mounted, which eventually led to severe damages to the components of the main engine and a complete failure of the main engine.

On 08 January 2019, at 0742, while the vessel was navigating through Skagerrak, an oil mist detector alarm was observed in the engine-room, followed by a Continue reading “Lubrication oil filter was mounted poorly resulting in engine failure”

Is the cargo too wet to load?

Wet Cargo
Wet Cargo

Do we know enough about the cargo we carry, ask Gard P&I Club. It may be impossible for crew to estimate the particle size but they can look out for signs of high moisture content.

Appendix 3, Art 2 of the IMSBC Code states “many fine particle cargoes, if possessing a sufficiently high moisture content are liable to flow”. There are two main concerns here for seafarers relating to liquefaction. Firstly, the fine particle size of the cargoes and secondly, the high moisture content, i.e. the moisture content is higher than the cargo’s transportable moisture limit (TML).

Continue reading “Is the cargo too wet to load?”

Yantian Express fire likely caused by coconut charcoal official report identifies

Yantian Express - Photo credit: Smit Nicobar
Yantian Express – Photo credit: Smit Nicobar

The Federal Bureau of Maritime Casualty Investigation (BSU) has published its investigation report about the causes of the fire in the area of the deck cargo on board the container ship Yantian Express, identifying coconut charcoal as the likely cause of the fire.

It was during the early morning hours of 3 January 2019 that fire broke out in the deck cargo in the area of cargo hold 2 on board the German flagged container ship Yantian Express. The ship was in the North Atlantic, due to reach Halifax, Canadathe following day. Continue reading “Yantian Express fire likely caused by coconut charcoal official report identifies”

USCG issues advice on tank cleaning and gas freeing operations

Safety Alert focusing on the dangers related with improper tank cleaning
Safety Alert focusing on the dangers related with improper tank cleaning

The Office of Investigations and Casualty Analysis has recently published a Marine Safety Alert, focusing on the dangers related with improper tank cleaning and gas freeing operations. Following several investigations on a tanker barge which exploded during cargo tank cleaning, USCG makes recommendations to avoid such incidents.

USCG has said that if the safety regulations under Title 29 Code of Federal Regulations (CFR) Part 1915 and Title 33 CFR Part 154 are not followed, then cargo Continue reading “USCG issues advice on tank cleaning and gas freeing operations”

Fixed gas detection systems discrepancies on liquefied gas carriers

USCG advice about common discrepancies with fixed gas detection systems
USCG advice about common discrepancies with fixed gas detection systems

The US Coast Guard has issued advice about common discrepancies associated with fixed gas detection systems onboard liquefied gas carriers specifically, which are a critical safety measure on liquefied gas carriers.

The International Code for the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk (IGC Code) requires the activation of alarms at specified vapor concentrations.

During inspection on three separate LNG carriers in Boston, Port State Control Officers (PSCOs) discovered issues with the fixed flammable gas detection system Continue reading “Fixed gas detection systems discrepancies on liquefied gas carriers”

Instagram Posts from the IIMS @iimsmarine

Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.

Strictly Necessary Cookies

Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.

Show details
Performance & Marketing Cookies

This website uses Google Analytics to collect anonymous information such as the number of visitors to the site, and the most popular pages. This also helps us optimise our marketing campaigns. User data sent to Google Analytics may be used for ad personalization and measurement of our ad campaigns. Keeping this cookie enabled helps us to improve our website.

Show details