The importance of cargo ventilation news bulletin issued by Japan P&I Club

 Containership - Photo credit: Japan P&I Club who have issued a news bulletin about the cargo ventilation
Photo credit: Japan P&I Club who have issued a news bulletin about the cargo ventilation

The Japan P&I Club has recently published a news bulletin. It highlights the importance of cargo ventilation, the introduction of air into and through the cargo space and the exhausting of the in-hold air.

Cargo ventilation may be needed in order to ensure that there is a sufficient oxygen supply for safe personnel entry into the cargo space. In addition, ventilation can remove poisonous and flammable gases which could give rise to a dangerous situation.

These gases might be produced by the cargo itself, e.g. evolution of carbon monoxide from a heating coal cargo, or they may originate from another external source, e.g. phosphine gas evolution during cargo fumigation.

Continue reading “The importance of cargo ventilation news bulletin issued by Japan P&I Club”

Danish Shipping presents new “Ahead of the Curve” strategy

men in suits at a conference - Photo credit: Danish Shipping
Photo credit: Danish Shipping

Chairman of Danish Shipping, Claus V. Hemmingsen, has presented the organisation’s new strategy – “Ahead of the Curve”, which covers the next four years and focuses on competencies, digitization and technological development as catalysts for continued growth in the coming years.

Danish Shipping’s strategy for 2018-2021 was launched at a members’ meeting. The strategy envisions to grow the Danish-flagged fleet with more than 10 pct. measured in tonnage, and minimum 10 pct. measured in the number of ships, during the strategy period.

Continue reading “Danish Shipping presents new “Ahead of the Curve” strategy”

Wingsail technology saves fuel and reduces emissions

Container ship
Container ship

Oceanfoil’s wingsail technology could achieve an average fuel consumption and emissions saving of 14% on a mid-sized tanker vessel.

This is the research finding from BMT, who said that Oceanfoil’s fuel-assist aerofoil technology, which uses wingsails to capture effective directional thrust from wind power, could also save up to up to 20% in certain wind and sea conditions.

Charles Moray, managing director of Oceanfoil, commented: “Oceanfoil’s ‘wingsail’, is a propulsion assist technology that is well suited for tankers and bulk carriers, which provide good opportunity for the wingsails to use the wind to create forward thrust – thus reducing reliance upon the vessel’s main engines.

Continue reading “Wingsail technology saves fuel and reduces emissions”

WAAMpeller 3D printed ship’s propeller approved

The new 3D painted propellor
The new 3D painted propellor

Following a rigorous testing process, verified by Bureau Veritas, the world’s first Class approved 3D printed ship’s propeller, the WAAMpeller, has been unveiled at Damen Shipyard Group’s headquarters in the Netherlands.

The five-company partnership started pooling their collective resources and knowledge to develop the world’s first 3D printed ship’s propeller seven months ago. Promarin provided the design of the triple-blade propeller. The Port of Rotterdam’s RAMLAB (Rotterdam Additive Manufacturing LAB) carried out fabrication using Wire Arc Additive Manufacturing (WAAM) techniques, supported by Autodesk’s expertise in software, robotics and additive manufacturing.

Continue reading “WAAMpeller 3D printed ship’s propeller approved”

Meeting IIMS members is so rewarding

Delegates participating in the IIMS 5th biennial UAE branch conference
Delegates participating in the IIMS 5th biennial UAE branch conference

November. Now where did that go? Ah yes I remember – it vanished in something of a whirl. From one training event and seminar to another. Hugely rewarding for me personally though I have to say and I was delighted to meet so many members, both at the UK events and at the UAE Branch Conference over the course of the month. I have learnt a great deal, which for a highly non-technical person such as me is probably a dangerous thing! However, it occurred to me that if I did, then so did our members too. Certainly the positive feedback would suggest that to be the case.

We have just released dates for our tentative training programme for 2018 and the schedule is published elsewhere in this bulletin. In Continue reading “Meeting IIMS members is so rewarding”

New resolution for inspection of holds and tanks

Inside of a hold tank
Inside of a hold tank

Local correspondents’ Pandi Liquidadores S.R.L, have submitted an update to the UK P&I Club regarding the new SENASA resolution for the inspection of holds and tanks in Argentina.

The inspection of holds and tanks has been a longstanding problem within the industry, especially when an official inspection was required by the National Food and Grain Health Authority (SENASA), UK P&I Club states.

These problems have been a major concern of the new Authorities of SENASA who came into office at the beginning of 2016 and addressed these issues by enacting resolution Nº 693E/2017, which was published on 23rd October 2017 and is in force from 1st November 2017. Continue reading “New resolution for inspection of holds and tanks”

New guide on how to carry charcoal and carbon cargoes in containers safely published

The Evergiven container ship
The Evergiven container ship

The International Group of P&I Clubs together with The Cargo Incident Notification System (CINS) has published a new guide with advise on the safe carriage of charcoal and carbon cargoes.

According to data, the local production of wood charcoal and carbon for domestic and export markets is about 53 million tonnes per year. These cargoes need to comply with the IMDG Code compliance and the aim of the guide is to highlight additional precautions to enhance their safe carriage.

Continue reading “New guide on how to carry charcoal and carbon cargoes in containers safely published”

Poor maintenance led to steering failure and grounding of the Bow Singapore

The Bow Singapore before its accident
The Bow Singapore before its accident

The Australian Transport Safety Bureau (ATSB) has released its investigation report into the grounding of the tanker Bow Singapore in Port Phillip Bay, Victoria, in August 2016, highlighting both procedural and maintenance issues as contributing to the accident.

On August 19, 2016, a Port Phillip Sea Pilot boarded the vessel. The pilot was to conduct the ship through The Rip and the South Channel to an anchorage in the northern part of Port Phillip.

Continue reading “Poor maintenance led to steering failure and grounding of the Bow Singapore”

Raising the bar in Vessel Assurance through IMCA eCMID accreditation

The ship at harbour
The ship at harbour

Stephen Birt, Chairman of the IMCA Marine eCMID Committee, has written this short article.

Those of you in the Offshore maritime industry are no doubt very familiar with the International Marine Contractor’s Association (IMCA) Common Marine Inspection Document (eCMID), or perhaps the smaller vessel equivalent Marine Inspection for Small Workboats (eMISW). In this article I use eCMID to include eMISW.

However, not everyone is aware of the recent upgrades to the system and database that have seen the most recent version (revision 10) released in July 2016, incorporating extra and refined supplements for various vessel types (including DP vessel and Heavy Lift for example), and also a review of the approximately 250 general vessel questions. Continue reading “Raising the bar in Vessel Assurance through IMCA eCMID accreditation”

Final report into the loss of EL FARO is published by USCG

Containership
Containership

The US Coast Guard has published the SS EL FARO Marine Board of Investigation report, which includes a detailed account of the accident along with the MBI’s conclusions on contributing factors and recommendations. The loss of the US flagged cargo vessel EL FARO, along with its 33 member crew, ranks as one of the worst maritime disasters in US history, and resulted in the highest death toll from a US commercial vessel sinking in almost 40 years.

Continue reading “Final report into the loss of EL FARO is published by USCG”

MAIB issues an essential Safety Digest featuring 25 cases

MAIb Safety Digest
MAIb Safety Digest

The Marine Accident Investigation Branch (MAIB) examines and investigates all types of marine accidents to, or on board UK vessels worldwide and other vessels in UK territorial waters. This Safety Digest (02/17) draws the attention of the marine community to some of the lessons arising from investigations into recent accidents and incidents. It contains information which has been determined up to the time of issue.

In his introduction to the Safety Digest, Steve Clinch, Chief Inspector of Marine Accidents for the MAIB says, “A fire is one of the most frightening things that can happen at sea. Often, seafarers have no ready access to the emergency services when a fire breaks out and will need to rely on their own resources, courage and training to tackle and extinguish the blaze quickly to ensure the safety of the ship and everyone on board. After reading one of the cases while editing this edition of the Safety Digest, I found myself thinking about the recent fire that engulfed Grenfell Tower, a west London residential tower block. This was an horrific incident; 80 people are currently presumed to have died but the ferocity of the fire means that the final death toll may never be known for sure. Why the Grenfell Tower fire spread so quickly is the subject of intense debate but its source was attributed to a domestic fridge/freezer that overheated. Case 10 provides a reminder that fires can quite easily start in a similar way on a ship. In that case a fire was caused when a travel fridge was placed on the carpeted area of the deck in a cabin; the lack of air circulation around the unit caused the fridge to overheat… fortunately the crew were able to extinguish the fire without too much damage being done.” Continue reading “MAIB issues an essential Safety Digest featuring 25 cases”

Yara Birkeland autonomous and zero emission vessel test model design demonstrated

The Yara Birkeland in a pool
The Yara Birkeland in a pool

A six metre long model of the final design of the autonomous and zero emission container vessel “Yara Birkeland” was launched in SINTEF Ocean’s sea laboratory in Trondheim, Norway, on 28 September.

In May, Yara announced the partnership with technology company Kongsberg to build the world’s first electric container ship.

The vessel will be built and put to use late 2018, as part of Yara International’s logistics value chain at the plant in Porsgrunn, Norway. The project is a collaboration between Yara and KongsbergGruppen, a Norwegian technology company.

Continue reading “Yara Birkeland autonomous and zero emission vessel test model design demonstrated”

Instagram Posts from the IIMS @iimsmarine

Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.

Strictly Necessary Cookies

Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.

Show details Hide details
Performance & Marketing Cookies

This website uses Google Analytics to collect anonymous information such as the number of visitors to the site, and the most popular pages. This also helps us optimise our marketing campaigns. User data sent to Google Analytics may be used for ad personalization and measurement of our ad campaigns. Keeping this cookie enabled helps us to improve our website.

Show details Hide details