The Dutch Safety Board has published an urgent Safety Alert following a recent flare explosion fatality. The incident happened on board a Dutch sailing ship in the Pacific Ocean.
Complying with the flare’s requirements and instructions, the experienced sailor fired the flare. The flare did not launch as intended, but exploded immediately leading to the flare explosion fatality. Continue reading “Safety alert issued after flare explosion fatality”
With less than three months until Ocean Business 2023, more details have been revealed about the Training and Demonstration programme, one of the main attractions of the global technology and science exhibition for marine industries. This year’s Training and Demonstration programme marks a year of exciting progress and development in the ocean environment.
The three-day show, which runs from April 18-20 at the National Oceanography Centre in Southampton, is open to all visitors for free by registering online. Continue reading “Unrivalled hands-on demo opportunities at Ocean Business 2023”
When Thai-flagged oil products tanker Smooth Sea 22 (IMO 9870991) suffered an explosion and a subsequent fire on 17th January, few realised that the event would expose a case of potential ship-identity fraud.
On January 24th the International Maritime Organization was reported to have declared the ship’s IMO number to be non-valid after it emerged that the ship that was masquerading as 2018-built ship was in fact built in 1986 and was suspected of previously being known as the 4,4821 gt Hai Zhou 168 (IMO 8514045), and before that as the Smooth Sea 28. Continue reading “Smooth Sea 22 was not the ship it claimed to be”
Poseidon Principles for Marine Insurance has published its first Annual Disclosure Report as a step forward towards transparency in the maritime and insurance sectors. In the report, eight of the world’s leading marine insurers have gathered and published client data to track their hull and machinery insurance portfolio’s climate impact. The goal is to support the industry’s green transition.
“This level of transparency is a major milestone on our journey to decarbonise the maritime industry”, said Patrizia Kern, Chair of the Poseidon Principles for Marine Insurance initiative and Marine Strategy Advisor – CEO Office at Swiss Re Corporate Solutions. Continue reading “First Annual Disclosure Report from Poseidon Principles for Marine Insurance”
During the response to a serious fire aboard the lumber carrier Almirante Storni in 2021, a Swedish Coast Guard vessel intentionally pressed its stern into the bulker’s hull, bending in plating and nearly causing flooding, according to the Swedish Accident Investigation Authority (SHK).
On December 4, 2021, a fire broke out in a deck cargo of lumber aboard the wood carrier Almirante Storni at an anchorage outside of the port of Gothenburg, Sweden. The vessel was taking on fuel oil at the time, and the bunkering vessel’s crew saw flames towards the Storni’s bow and raised the alarm. Continue reading “Response vessel damaged the hull of Almirante Storni”
Aluminium phosphide, the precursor compound from which phosphine gas is generated, is available in different forms and can be supplied in aluminium bottles as tablets of about 3g each or as pellets of about 1g. Alternatively it can be supplied in fabric ‘socks’ or strips of cojoined paper sachets which enable the fumigant residues to be easily removed in the situation where it is undesirable to have fumigation residue remaining in the cargo. Generally, and as a rule of thumb, Degesch state that one 3g tablet of aluminium phosphide formulation will generate about 1g of phosphine gas.
Usually, the quantity of aluminium phosphide applied per hold is calculated Continue reading “Risks of in-transit fumigation leading to phosphine gas explosions”
Dick Farrel Camoying, Assistant Vice President, Technical Manager, Skuld Club, focuses on the subject of ships’ purifiers, and says that they are one of the most important pieces of auxiliary machinery.
According to Mr. Camoying, the main purpose of purifierss is to separate water and other contaminants in the oil mixture using the principle of density difference. Therefore, good maintenance of purifiers is important for smooth and accurate operation of the units. Some factors that influence a good working purifier are temperature, feed rate, the type of gravity disc, and oil density. Continue reading “How to ensure optimal efficiency of purifiers onboard”
New scatter diagram and wave spectra defining design environmental conditions will be used for wave load, fatigue, and seakeeping calculations. As part of IACS’ ongoing commitment to safe ships and clean seas, a long-term review of wave data has now concluded with the publication of a revised version (Rev.2) of IACS Recommendation No.34 which provides advice on sea states as well as wave spectrum, spreading, heading distribution and vessel speed.
Accurate Wave data remains of paramount importance as this data is used to represent the ocean environment, underpinning wave load prescription, which in turn, greatly impacts hull structural requirements. Continue reading “IACS develops new wave data scatter diagram”
The biocide, Selektope, is being introduced into marine antifouling coatings to enhance the performance of self-polishing co-polymer (SPC) marine coatings. I-Tech’s team of R&D scientists have been working on the technology for the last five years and say they have discovered new ways in which the first-of-its-kind biocide, Selektope can be introduced to marine antifouling coatings in combination with other biocides with little or no effect on formulation chemistry or performance.
The technology works by improving the dispersion of the active substance via adsorption to paint pigment particles. Continue reading “Antifouling performance is being enhanced”
New legislation is being introduced to crack down on the dangerous misuse of watercraft such as jet skiers, with the Maritime and Coastguard Agency (MCA) being granted more powers to prosecute perpetrators of accidents.
The new law comes into force on 31 March 2023 in time for the busy summer period and will enable watercraft users to be prosecuted and bound by the same laws that apply to ships in order to help to prevent accidents. This follows a boom in the watercraft industry during the pandemic with the number, size, power and availability of watercraft like jet skis increasing, and their use in UK waters rising significantly. Continue reading “MSA law change: fines and prison time for reckless UK jet skiers”
Over the past year, River Canal Rescue, says it’s witnessed an uncharacteristic peak in fuel-related component breakdowns due to a new problem callled ‘sticky fuel’. RCR said its marine engineers now respond to two-three cases per week on the inland waterways and managing director, Stephanie Horton, is keen to alert the wider marine community to the issue.
“We first became aware of sticky fuel when we had two identical jobs where fuel injectors were diagnosed as needing an overhaul, yet their replacements stopped working within a week, and the injection pumps were found to have failed even though the diesel was clear and bright,” she said. Continue reading “Boat owners beware of sticky fuel”
John Southam, Loss Prevention Executive, and David Richards, Director (Claims), both from North P&I Club, offer lessons learned and discuss avoidable claims related to the carriage of finished and semi-finished steel products which continue to remain an issue.
The issues highlighted by North P&I include the importance of recording the preload condition and defending yourself against allegations of unseaworthiness with strong evidence.
In some recent cases it became apparent that the preload condition of the steel cargo was poor, whether it was physical damage through impact or corrosion damage from wetting. And when such damage to the cargo is noted at discharge, a high value claim can result. Continue reading “Lessons learned from wet damage steel product claims”
Instagram Posts from the IIMS @iimsmarine