IIMS arranged a visit for a dozen members and non-members to the Royal Huisman superyacht yard in Vollenove, Netherlands on 6 and 7 April, followed by half a day’s training on day two.
The yard visit, which had been planned for some months, was hailed a great success by those who attended. To see and understand at first hand the challenges and high skills required to produce these iconic craft was a privilege indeed.
Continue reading “The inner workings of the Royal Huisman superyacht yard”
Sad news has reached IIMS that long standing member, Captain David (Dave) Green, who was recognised for his significant contribution to the Institute with Honorary Membership, has passed away.
Capt Ian Wilkins MM FNI HonMIIMS, pays tribute to his friend and has written this fitting obituary.
It was with great sadness that we learned of the passing of Captain David (Dave) Green peacefully at home on Sunday 26th March.
Continue reading “Captain David (Dave) Green, Master Mariner, obituary”
Of all those who board ships and need enclosed space entry, the surveyors are most at risk. In many cases the spaces they are about to enter are an unknown entity, therefore they are totally dependent on the ship’s management team having these spaces properly prepared with a trained rescue party adequately equipped and standing by.
It is now a matter of record that ships have more incidents, accidents and fatalities involving enclosed spaces than any other component of the marine sector. These accidents and subsequent fatalities are predominantly the result of people entering, working in, or ironically attempting rescue from those spaces.
One of the best known ferry routes in the USA, if not the world, the Staten Island run, is due to have three new ferries following the awarding of a contract to Florida based Eastern Shipbuilding.
The instantly recognisable bright orange Staten Island run passenger ferries carry 70,000 people a day between St George and Whitehall Street, with sweeping views of the Statue of Liberty, Brooklyn, Governor’s Island and the Manhattan skyline. The free boarding at the conveniently located terminal near Wall Street makes the short route a major tourist attraction.
Continue reading “New vessel contract for the iconic Staten Island run”
The New Zealand Ministry for Primary Industries (MPI) has issued a notice announcing that all vessels arriving in New Zealand must have clean hulls from May 2018 as new biofouling regulations are set to become law. The Craft Risk Management Standard (CRMS) has been developed to provide guidance regarding compliance.
From May 2018, vessels must arrive in New Zealand with a clean hull. Vessels staying up to 20 days and only visiting designated ports (places of first arrival) will be allowed a slight amount of biofouling. Vessels staying longer and visiting other places will only be allowed a slime layer and goose barnacles.
“Twisties” adopts industry standard 20-foot cargo container twist-lock centres, ensuring that wind project cargo can be transported on existing vessels arranged for containers and avoids the need to develop expensive new specialist transportation and installation vessels for next generation (10 MW+) offshore turbines.
DNV GL, the world’s largest resource of independent energy experts and certification body, has launched a revolutionary new joint industry project (JIP) to develop a Recommended Practice intended to de-risk the adoption of “Twisties” and demonstrate the unitisation of wind project cargo. The innovative concept is called “Twisties” – a modular project-cargo transport frame system that is sea-fastened using container twist locks – and which gives the frames their name.
Continue reading “Unitisation of wind project cargo concept launched by DNV GL”
Ostseestaal, a Germany yard, has produced a tourist boat powered only by electric motors with the significant application of solar panels. From the experience of building and operating this first vessel the company has developed plans for a larger design with more than double the passenger capacity.
Ostseestaal is a subsidiary of the Dutch Centralstaal company with both focusing on accurately cut and processed steel and aluminium kits for ship and boat building. Both designs are based on hydro-dynamically efficient catamaran hulls with construction in aluminium. The smaller design that is currently in operation, the CIG FS 1850 is a low profile design for operating in areas where low bridges might restrict operations and it has seating for 35 plus 15 standing places and space for 15 cycles emphasising its dual role as a tourist vessel and a ferry. An alternative layout can accommodate 60 passengers and two wheelchairs.
Continue reading “Ostseestaal launches solar powered electric tourist boat”
London P&I Club has released a joint publication, in association with TMC Marine and Bureau Veritas. The aim of this excellent guide is to give operational guidance for vessels that carry cargoes which could be subject to liquefaction. The Club says that, although significant progress on the issue has been made so far, the liquefaction phenomenon continues to be as relevant today as it was years ago.
While the main requirements for the safe carriage of solid bulk cargoes are enshrined in the IMSBC Code, this booklet outlines the precautions operators should take before accepting cargoes for shipment and the procedures they should follow for the safe loading and carriage of the nominated cargo.
Continue reading “Reducing the risk of liquefaction onboard”
The North P&I Club has issued a loss prevention briefing bulletin, which details all the important and necessary actions and steps to take into consideration when conducting a proper and professional incident investigation. The Club reviews how to conduct an investigation; how to collect and preserve the evidence; how to examine data and how to look for and find probable causes and finally how to use data to identify trends.
In particular, it is noted that, fundamentally, the investigation should establish:
• who was involved
• what happened
• why did it happen
Continue reading “Loss prevention briefing bulletin issued by North P&I Club”
Rolls-Royce has signed a deal with Swedish ferry company Stena Line AB, to collaborate in the development of its first intelligent awareness system.
Intelligent awareness systems will make vessels safer, easier and more efficient to operate by providing crew with an enhanced understanding of their vessel’s surroundings. This will be achieved by fusing data from a range of sensors with information from existing ship systems; such as Automatic Identification System (AIS) and radar. Data from other sources, including global databases, will also have a role.
Continue reading “Rolls-Royce and Stena Line to develop intelligent awareness system”
Due to a recent increase in the incidence of deck cargoes shifting in heavy weather, the London P&I Club said it supports a recommendation to appoint a marine warranty surveyor to supervise high-risk marine construction and transportation project operations where appropriate.
“In the past year, LOC has seen many deck cargoes shifting in heavy weather,” Paul Walton, a director with international marine consultant LOC (Hong Kong), said.
Martek Marine has been awarded a ground breaking two year Remotely Piloted Aircraft Services (RPAS) contract from the European Maritime Safety Agency (EMSA). The services offered will fulfil part of the world’s largest ever maritime drone contract.
Part of a five year EMSA strategy of improving coastguard monitoring and surveillance of maritime activity valued at EUR 67 million, the service provision from Martek Marine not only includes the RPAS, commonly known as drones, but also the pilots, long-range antennae, mission control vehicles and ground crew. Video and drone sensor data will be streamed live to a control centre, to allow EU Member States to make prompt decisions on intervention actions. Continue reading “Martek Marine named on major €67M maritime drone contract”
Instagram Posts from the IIMS @iimsmarine