Health & Safety

ITF: Fatal accidents in Russia and Indonesia were avoidable

Posted on by News Hound
ITF is repeating its call for ILO and other international maritime bodies and authorities to take steps to move towards a modern set of standards for the inland navigation industry.
ITF is repeating its call for ILO and other international maritime bodies and authorities to take steps to move towards a modern set of standards for the inland navigation industry.

Following two deadly and harrowing incidents involving inland navigation vessels in Russia and Indonesia in recent weeks that have claimed the lives of almost 200 people, the International Transport Workers’ Federation (ITF) has expressed its deep concern regarding the industry’s procedural and safety compliance, noting that these accidents could have been prevented.

In the first accident, a catamaran, carrying passengers over its capacity, capsized in the Volga River after colliding with another boat, killing 11 people. Russia’s Investigative Committee said the boat’s captain, who was also the owner of the vessel, was drunk and likely to blame for the crash.

The second incident involved the capsizing of a ferry carrying three times its passenger capacity on Lake Toba, Indonesia, leaving over 190 people dead or missing. The vessel was reportedly operating illegally with Continue reading “ITF: Fatal accidents in Russia and Indonesia were avoidable”

Low speed diesel engines save on claims is the finding of a recent Swedish Club study

Posted on by News Hound
Statistically, a vessel will suffer between one and two incidences of main engine damage during its life time, according to the club
Statistically, a vessel will suffer between one and two incidences of main engine damage during its life time, according to the club

In a recent study the Swedish Club has warned that vessels propelled by medium or high speed diesel engines have a claims frequency two and a half times higher than slow speed engines with an average claims cost of about $650,000.

Statistically, a vessel will suffer between one and two incidences of main engine damage during its life time, according to the club. However, the incidence rate varies by vessel class (and engine type).

“Our research shows that bulkers and tankers are the best performers for claims cost,” said senior technical advisor Peter Stalberg. “Most of these vessels have slow speed engines. Conversely passenger vessels/ferries have the highest frequency of main engine claims – 0.066 claims per vessel and year. Often these vessels have multiple medium speed engine installations.”

Stalberg advises that when shipowners have Continue reading “Low speed diesel engines save on claims is the finding of a recent Swedish Club study”

Fire safety on ferries guide issued by the Standard P&I Club

Posted on by News Hound
To raise awareness, the Standard P&I Club has published a 36 page guide about fire risks on ferries.
To raise awareness, the Standard P&I Club has published a 36 page guide about fire risks on ferries.

To raise awareness, the Standard P&I Club has published a 36 page guide about fire risks on ferries. This type of ship presents particular risks due to the cargo onboard, including cars, lorries and refrigerated containers. All of these have combustible material and are fire hazards in their own right.

There are numerous causes of fire but the most relevant ones to ferries are:

– Electrical defects, such as overloaded electrical equipment, damaged cables and poorly formed connections. – Electrical faults in vehicles, especially when engines are hot/running. Reefer containers are major sources of fire.
– Mechanical failure, such as ignition from overheated bearings or a catastrophic engine failure.
– Uncontrolled release of oil or flammable liquid coming into contact with a hot surface, or the release of a low flashpoint fuel, such as petrol vapour, coming into contact with a source of ignition.
– Dry, readily combustible materials (such as wood, paper, textiles) coming into contact with an ignition source, – such as a lighted cigarette, sparks or conducted heat from burning or cutting, highintensity lights or defective electrical equipment.

Things to do Continue reading “Fire safety on ferries guide issued by the Standard P&I Club”

Flexible mobdock repair method for underwater shaft seal repairs developed by Hydrex

Posted on by News Hound
Diver/technician re-welding the rope guard after shaft seal replacement
Diver/technician re-welding the rope guard after shaft seal replacement

Hydrex has developed a flexible mobdock repair method that enables the underwater replacement of all types and sizes of shaft seals. This technology has been successfully used by Hydrex diver/technicians for over a decade. It allows ship owners to keep their vessel sailing, saving precious time and money.

Damaged stern tube seals will cause an increasing amount of oil leaking or water ingress as the damage worsens. By replacing the seals when the damage is first discovered, Hydrex keeps the down time low. The ship can keep its schedule as seal repairs can be performed during cargo operations. This is done by creating a dry underwater working environment around the shaft.

It is not always straightforward to replace seals, because there can be quite a bit of variation in the configurations of the stern tube itself. There can also be complications with the liners, which can be worn down and show ruts. All this is routinely handled by Hydrex teams on the jobs.

In this article you can find a short summary of some of the recent Continue reading “Flexible mobdock repair method for underwater shaft seal repairs developed by Hydrex”

North P&I: The appointment of a experienced surveyor is vital

Posted on by News Hound
North of England P&I Club has elected to publish a briefing document providing best advice leading to the minimisation of the risk of cargo damage
North of England P&I Club has elected to publish a briefing document providing best advice leading to the minimisation of the risk of cargo damage

Several problems can arise when transporting steel cargoes by sea which could easily be resolved by having the vessel be surveyed by an experienced surveyor before departure reports North P&I. The more common issues can be broadly categorised as mechanical damage, or rust-related problems. Indeed, in many cases the damage occurs before it is even loaded onto the carrying vessel. North of England P&I Club has elected to publish a briefing document providing best advice leading to the minimisation of the risk of cargo damage.

Common issues that can result in damage to the cargo include poor handling, substandard stowage and securing, water ingress into the hold and improper hold ventilation.

Key issues

Pre-shipment condition: It is not uncommon for steel cargoes to Continue reading “North P&I: The appointment of a experienced surveyor is vital”

Green light to adopt Methanol given as a sustainable marine fuel

Posted on by News Hound
Topic areas of the project’s final reports include the technical feasibility of converting vessels to propulsion using Methanol
Topic areas of the project’s final reports include the technical feasibility of converting vessels to propulsion using Methanol

The Methanol Institute has welcomed the findings of the Sustainable Marine Methanol (SUMMETH) project, which has backed the increased use of Methanol as a marine fuel.

The research concluded that there are no obstacles to the efficient use of Methanol in a converted diesel engine and that smaller vessel conversion projects are feasible and cost-effective, with levels of safety that easily meet existing requirements.

Switching to Methanol would offer immediate environmental benefits, including close to zero SOx and particulate matter emissions and significantly lower NOx emissions compared to conventional marine fuels or biodiesel.

Continue reading “Green light to adopt Methanol given as a sustainable marine fuel”

A culture of poor maintenance practices led to Caribbean Fantasy fire says report

Posted on by News Hound
The fire could not be contained, so the master ordered the ship to be abandoned.
The fire could not be contained, so the master ordered the ship to be abandoned.

A poor safety culture and the ineffective implementation of a safety management system were identified as the most likely causes of the 2016 fire aboard the RoRo vessel Caribbean Fantasy.

The vessel’s main engine room was hit by fire in the morning hours of 17 August 2016, when fuel spraying from a leaking flange came in contact with a hot surface on the port main propulsion engine, the National Transportation Safety Board (NTSB) said in a report.

The fire could not be contained, so the master ordered the ship to be abandoned. At the time of the incident, the Baja Ferries-operated vessel was 2 miles northwest of San Juan, Puerto Rico.

Continue reading “A culture of poor maintenance practices led to Caribbean Fantasy fire says report”

Specialist rescue system for overboard crew launched

Posted on by News Hound
One of the rescued crewmembers with a life jacket on
One of the rescued crewmembers with a life jacket on

A specialist system to rescue crew members who fall overboard has been developed by boat builder Goodchild Marine Services.

The Man Overboard Recovery Platform (MOB) has been designed to reduce the risk of cardiac arrest in anyone that has fallen overboard by lifting the casualty horizontally rather than vertically.

“This has become one of our bestselling products with widespread interest in the UK and abroad,” said Alan Goodchild, Goodchild Marine MD.

“Key features include an automatically-hinged propeller guard to prevent injury to the casualty, manual back-up and self-cleaning tracks.

Continue reading “Specialist rescue system for overboard crew launched”

BSU report shows that MSC Katrina fire was caused by self-heating

Posted on by News Hound
The MSC Katerina
The MSC Katerina

The German Federal Bureau of Maritime Casualty Investigation has released its reports about two non-connected fires on container ships. The MSC Katrina was in the Elbe estuary when the fire was detected on 20 November 2015. The second ship, the Ludwigshafen Express was in the Red Sea when fire was noticed during an inspection in February 2016.

The first incident

The MSC Katrina was located in the Elbe estuary when its smoke detection system discovered fire. As a result, the Central Command for Maritime Emergencies had the ability to deploy specially trained firefighters.

Continue reading “BSU report shows that MSC Katrina fire was caused by self-heating”

Stainless steel bolts at offshore facility fail due to corrosion cracking

Posted on by News Hound
A number of strain-hardened, Type 304 stainless steel bolts, (ASTM A193 B8, Class 2) failed unexpectedly at an offshore facility
A number of strain-hardened, Type 304 stainless steel bolts, (ASTM A193 B8, Class 2) failed unexpectedly at an offshore facility

The International Association of Oil & Gas Producers (IOGP) published an alert regarding an unexpected failure of certain kinds of strain-hardened Type 304 stainless steel bolts. The failure happened at an offshore facility during a pneumatic leak test of gas piping exiting a test separator.

The incident

A number of strain-hardened, Type 304 stainless steel bolts, (ASTM A193 B8, Class 2) failed unexpectedly at an offshore facility while a pneumatic leak test of gas piping exiting a test separator was being conducted.

Strain-hardening austenitic stainless steel nuts and bolts to increase their strength may increase their sensitivity to chloride-induced stress corrosion cracking (CISCC) and reduce their safe upper temperature limit. Other factors such as Continue reading “Stainless steel bolts at offshore facility fail due to corrosion cracking”

Ethylene vapors activate carbon monoxide alarm says safety alert

Posted on by News Hound
A certified marine chemist traced the source of the vapors to an eight inch crack on a cargo vapor line
A certified marine chemist traced the source of the vapors to an eight inch crack on a cargo vapor line

The USCG has published a safety alert informing marine inspectors that ethylene vapors on LNG carriers can activate Carbon Monoxide alarms. Specifically, during an examination of a LNG carrier whose cargo tanks contained ethylene vapors, PSC Officers (PSCOs) received alarms on their portable four gas meters giving a reading of 60 to 100 parts per-million (PPM) Carbon Monoxide (CO).

A certified marine chemist traced the source of the vapors to an eight inch crack on a cargo vapor line. PSCOs initially thought the alarm was related to a combustion event and did not suspect the ethylene vapors were the source, because they did not get a Lower Explosive Limit (LEL) reading on their monitors.

The chemist indicated that the LEL most likely never alarmed because of high winds on deck. He further explained that the molecular weight of Ethylene (28 g/mol) was identical to the molecular weight of CO which accounted for the CO PPM readings. USCG personnel contacted the manufacturer who confirmed that Continue reading “Ethylene vapors activate carbon monoxide alarm says safety alert”

Incorrect oxygen welding gas hose led to fire

Posted on by News Hound
The hose had been recently replaced, but the replacement hose was a hydraulic oil service hose with oxygen fittings.
The hose had been recently replaced, but the replacement hose was a hydraulic oil service hose with oxygen fittings.

In its latest Safety Flashes, IMCA presents a case of a fire due to incorrectly selected oxygen welding gas hose, during a routine cutting job onboard a ship. There were no injuries or ship damage, but investigation later revealed that the hose had been recently replaced with one that did not comply with ISO 14113 specification.

The incident

The ship’s welder opened the Oxygen and Acetylene gas bottle valves in order to do a cutting job on deck. These gas bottles were attached to the vessel’s integrated welding gas system. Opening the valve on the Oxygen bottle caused an explosion to a short, high pressure hose delivering oxygen from the bottle to the oxygen gas regulator. The end of the hose caught fire and was quickly extinguished by turning off the oxygen bottle. Nobody was injured and the only damage was to the hose that completely separated.

Findings

The hose had been recently replaced, but the replacement hose was a hydraulic oil service hose with oxygen fittings. The replacement hose was not Continue reading “Incorrect oxygen welding gas hose led to fire”

Instagram Posts from the IIMS @iimsmarine

Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.

Strictly Necessary Cookies

Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.

Show details
Performance & Marketing Cookies

This website uses Google Analytics to collect anonymous information such as the number of visitors to the site, and the most popular pages. This also helps us optimise our marketing campaigns. User data sent to Google Analytics may be used for ad personalization and measurement of our ad campaigns. Keeping this cookie enabled helps us to improve our website.

Show details
Powered by  GDPR Cookie Compliance