The INTERCARGO Bulk Carrier Casualty Report provides an analysis of casualty statistics covering the years 2010 to 2019. Over that period, thirty-nine bulk carriers with 173 seafarers were reported lost, based on available reports of total losses and constructive total losses from public sources and IMO’s GISIS.
Cargo shift and/or liquefaction has been one of the greatest concerns for the safe carriage of dry bulk over Continue reading “INTERCARGO publishes Bulk Carrier Casualty Report”
Over the years there have been many incidents in the shipping industry involving leakage of flammable and toxic gases into pump rooms, void spaces, engine rooms and other compartments. A mixture of gas in the air beyond certain concentration levels can be life threatening for crew entering these spaces and pose a serious fire risk. The International Gas Carrier Code (IGC Code) states that gas detection equipment shall be installed to monitor the integrity of the cargo containment, cargo handling and ancillary systems, and should be tested in accordance with recognized standards. To ensure that the fixed gas detection system operates effectively, timely and accurate calibration of the sensors is critical.
On 3 February 2020 the United States Coast Guard (USCG) in their marine safety alert 02-20 highlighted Continue reading “Fixed gas detection system: How sure can you be that the correct gas concentration is displayed?”
The UK P&I club has published a risk identification guide entitled ‘Risk awareness passenger claims: Passenger ships and ferries – injury and illness – an aid to risk identification and loss reduction’. This essential booklet is a guide to the controls and key points that the UK Club’s Risk Assessors look for when inspecting a vessel.
It will allow you to carry out a similar check on the Threats and Controls and to make sure the vessel has a good risk profile.
Each Threat is followed by a ‘score’ section where the individual Controls can be graded according to how effective they are: Continue reading “UK P&I Club publish Risk identification guide for commercial vessel inspections”
With the current COVID-19 pandemic forcing the country into lockdown, the Royal Yachting Aassociation has received a considerable number of enquiries from concerned members who are not able to gain access to their boats now that most marinas have controlled access.
RYA is acutely aware that their members currently have valid concerns about the inability to undertake checks in respect of security and essential maintenance. In response, the RYA is writing to key Government Ministers seeking definitive guidance that will give a clear and practical way forward to give owners immediate access to their boats whilst respecting current measures to control COVID-19.
Continue reading “RYA leads call for limited and controlled access to marinas”
The Swedish Club has analysed an incident of an accidental oil spill while bunkering in its recent club bulletin. The subsequent report by The Swedish Club highlights that the crew did not deploy the oil boom because of the potential cost implications. As a result the oil spread across the harbour.
The vessel in question was starboard side alongside and carrying out a cargo operation. The Chief Engineer had ordered a fuel barge to bunker 350 MT of fuel oil. The fuel barge came alongside on the port side in the morning. A hose was connected from the barge to the portside bunker station. The Chief Engineer had Continue reading “The Swedish Club shares lessons learned about an oil spill incident while bunkering”
The National Transportation Safety Board (NTSB) has published an investigation report on the engine room fire aboard the bulk carrier St Clair whilst in layup status at TORCO dock in Maumee River, Toledo, in February 2019. The investigation has highlighted a lack of operating procedures for continuous monitoring of the vessel while in layup.
About 2010 local time on February 16, 2019, a fire was reported on the bulk carrier St Clair while the vessel was laid-up for the winter at the CSX TORCO Iron Ore Terminal (TORCO dock) at the mouth of the Maumee River in Toledo, Ohio. No one was onboard. The fire was extinguished approximately 36 hours Continue reading “St Clair: Engine room fire on bulk carrier while in layup status report published”
Static towing assembly guidelines: This information paper supplements the OCIMF publication Guidelines to Offshore Tanker Operations (GOTO) and should be read along with the relevant guidance for static towing operations.
The purpose of this information paper is to provide technical guidance on selecting fit for purpose towing assemblies that minimise risk of injury to crew members or damage to equipment, and to optimise the effectiveness of static towing operations.
This paper discusses the technical factors that tug operators should consider, in collaboration with terminal operators, when selecting the components of towing assemblies for static towing operations at both Single Point Mooring (SPM) and Floating (Production) Storage and Offloading(F(P)SO) terminals.
The recommendations in this information paper come from extensive industry data gathering and a Continue reading “Static towing assembly guidelines published by OCIMF”
The points made in this updated COVID-19 Safety Working Guide produced by IIMS are essentially common sense suggestions and do not carry any official or authorised backing. Also, remember that advice will change periodically around the world in what is a fast moving situation. Thanks are due to Maurice Pickles, Capt Chris Kelly and the Workboat Association as additional reference sources.
The health and safety of marine surveyors, not just IIMS members, and other related personnel at this time is of primary importance and must not be compromised, especially when coming into contact with others during the course of their work, which is the key focus of our COVID-19 Safety Working Guide. Whilst many marine surveyors are idle at this time, some have still been working in various parts of the world. But as Governments start to look at progressively loosening lockdown procedures, now is not a time to become complacent. COVID-19 remains active in our communities and is likely to remain a challenge for many months until a reliable vaccine is found; so great care should be taken for the foreseeable future to avoid contracting or spreading the disease. No matter if you are currently working, or plan to resume surveying and inspecting soon, here is some practical, common sense advice to help you keep safe. Below is a summary of our COVID-19 Safety Working Guide: Continue reading “COVID-19 Safety Working Guide – latest IIMS update”
A new COVID-19 Good Practice Guide for Workboats has been published by the Workboat Association to help minimise the spread of COVID-19, protect people’s health and maximise efficiency when responding to an COVID-19-related emergency situation.
The Workboat Association Good Practice Guide says:
It is recommended that Workboat Operators implement the following controls within their organisations to minimise the spread of COVID-19 on board and within the workplace, protect the health of employees [seafarers], passengers and public, and to maximise efficiency when responding to an emergency situation related to COVID-19.
This Good Practice Guide has been created based upon the current industry best practice and guidance Continue reading “Workboat Association publishes a Coronavirus Good Practice Guide”
Engineers at Aqueduct Marina have won a tender to work on the RIVER project, a new initiative they believe could help shape the development of the next generation of boat engines.
The RIVER project, of which a new boat to be built by Aqueduct Marina for the Canal & River Trust will play a major part, consists of nine partners from five EU states and five associated partners involved in the capture, storage, treatment of CO2 and waterways.
The project aims to develop internal combustion engines to virtually eliminate CO2 emissions. Continue reading “The RIVER project designed to elimate CO2 emissions underway”
NTSB issued an investigation report on the overpressurization and rupture of a cargo tank on the cargo ship Fairchem Filly while at Houston Ship Channel, in May 2019. Investigators stressed that the vessel and terminal personnel involved were not following procedures related to cargo discharge and nitrogen-blanketing operations.
On 30 May 2019, about 0750 local time, the Marshall Islands-flagged chemical tanker Fairchem Filly, with a crew of 22, experienced an overpressurization of the number 3 port and starboard cargo tanks while discharging liquid hexene at Vopak Terminal in Deer Park, Texas.
The overpressurization resulted in damage to the number 3 port cargo tank and the tank top (deck). All cargo was contained on board the double-hulled vessel, with no pollution or injuries reported. Damage to Continue reading “Overpressurization and rupture of cargo tank onboard Fairchem Filly report published”
NTSB has published its investigation report about the fire onboard and subsequent sinking of the fishing vessel Ariel, while in Sheep Bay, Alaska, in August 2019. The investigation identified ignition of fuel leaking from the generator fuel supply line as key cause of the fire.
On August 26, 2019, the fishing vessel Ariel was transiting Sheep Bay, Prince William Sound, Alaska, when a fire broke out in the vessel’s engine room. The four crewmembers aboard the Ariel attempted to fight the fire, but they were unsuccessful and abandoned ship into the vessel’s skiff.
The Ariel continued to burn and subsequently sank. Good Samaritan vessels rescued the Continue reading “Ariel: Ignition of fuel leaking from the generator fuel supply line in the engine room caused sinking says report”
Instagram Posts from the IIMS @iimsmarine